Impact of parental attributes on the oral health-related quality of life of Brazilian preschool children.

PURPOSE: Considering the importance of parental attitudes and their influence on children's oral health, it is important to know which characteristics may impact it. The aim of this population study was to evaluate the impact of the parental sociodemographic characteristics on the oral health-related quality of life (OHRQoL) of preschool children from southeastern Brazil. METHODS: A population-based study was conducted with a sample of 321 children aged 2 to 5 years old who underwent a calibrated clinical oral examination to assess oral health status and their parents were asked to answer the two following questionnaires: (1) sociodemographic conditions and (2) Brazilian version of the Early Childhood Oral Health Impact Scale (B-ECOHIS). Descriptive analysis, Mann-Whitney and Kruskal-Wallis tests and adjusted Poisson regression models were used. RESULTS: Younger mothers (RP: 1.47; 95% CI: 1.11-1.95), lower household income (RP: 1.47; 95% CI: 1.11-1.96) and the presence of dental caries (RP: 2.28; 95% CI: 1.74-3.0) were more likely to have a negative impact on the OHRQoL B-ECOHIS total scores (P < 0.01). CONCLUSION: The characteristics of mothers, such as age, schooling and salary, influenced the mean B-ECOHIS total score; however, paternal attributes were not associated with a negative impact on the children's quality of life. Also, dental caries and household income influenced the children's oral health-related quality of life.

Twenty-month Performance of a Universal Bonding System on Simulated-challenged Dentin Substrates Pretreated with Chlorhexidine.

OBJECTIVES: Since the use of dentin antiproteolytic agents with universal adhesives (UAs) can potentially degrade the bonding interface, this study evaluated bond strengths with and without chlorhexidine (CHX) on variously altered dentin surfaces for up to 20 months. METHODS: Human molar specimens (n=20) were categorized by substrates as S=sound, E=eroded, and C=carious, and by pretreatment as W=water or CHX. These specimens were subjected to micro-tensile bond strength (µTBS) testing at 24 hours, 6 months, and 20 months, after 30 seconds of pretreatment with CHX or W, followed by self-etching and bonding (Adper Single Bond Universal, 3M ESPE). Modes of failure were assessed using optical microscopy (40×) and scanning electron microscopy (SEM), and the results were analyzed by 3-way ANOVA and Tukey's statistical tests (α=0.05). RESULTS: Substrate (p<0.001), pre-treatment (p=0.0413), and time (p<0.0001) were statistically significant. The sound-dentin group in initial time (W=39.27/CHX=40.55) yielded the higher µTBS values (MPa) in comparison with altered substrates pre-treated with CHX (E-CHX=19.84; C-CHX=18.24) after 20 months, which showed the lowest values. Under SEM analysis, heterogeneous patterns appeared in the hybrid layer of the CHX-treated group, particularly in the altered substrates. CONCLUSIONS: Bond strength to dentin decreased over a period of 20 months using UA with 10-methacryloyloxydecyl-dihydrogen phosphate (MDP) in self-etching mode. Substrates altered by erosion or caries have impaired adhesion and associated clinical use of UA with MDP and CHX should be avoided.

Clinical Evaluation of Lithium Disilicate Veneers Manufactured by CAD/CAM Compared with Heat-pressed Methods: Randomized Controlled Clinical Trial.

CLINICAL RELEVANCE: Lithium disilicate veneers for esthetic restorations show great accuracy and similarity, regardless of the type of fabrication technique.

Randomized clinical trial of class II restoration in permanent teeth comparing ART with composite resin after 12 months.

OBJECTIVE: This study evaluated the effectiveness of class II restorations, in permanent teeth, through the ART technique in comparison to composite resin. MATERIALS AND METHODS: Participants (154), aged 8 to 19 years, with good general health, with class II cavities in permanent teeth, and without pulp involvement and tooth pain were included in this parallel and randomized clinical trial. The Ethics Committee approval number was CAAE: 24012913.0.1001.5417. Seventy-seven restorations were made with each restorative material (Equia Fil-GC Corporation and Z350-3M). Evaluations occurred at 6 and 12 months by the criteria of ART and the USPHS modified. Data were analyzed by Mann-Whitney, chi-square, Fisher's exact, chi-square tests with linear trend and logistic regression by enter method (p < 0.050). The Kaplan-Meier test evaluated the survival rates of the restorations. The log-rank test compared the survival curves. RESULTS: Regardless of the evaluation criteria used, the success rates of ART restorations were 98.7% (6 months) and 95.8% (12 months) and for composite resins were 100% (6 months) and 98.7% (12 months), with no statistical difference of restoration groups (p > 0.050). Survival rates for restorations, regardless of the evaluation criteria used, are the same as the success rates, with the exception of ART restorations at 12 months of follow-up (94.8%). CONCLUSION: No differences in the success rates of class II restorations of ART compared to resin composite, in permanent teeth, were observed after 12 months. CLINIC SIGNIFICANT: HVGIC can safely be used to restore proximal cavities in permanent teeth up to 12 months.

Resin-Based Materials Protect Against Erosion/Abrasion-a Prolonged In Situ Study.

While patient compliance is key to preventive measures related to dental erosion, the application of resin-based materials could serve as an additional treatment to inhibit erosion progression. This in situ study evaluated the effect of applying resin-based materials, including resin infiltrant, on previously eroded enamel subjected to prolonged erosive and abrasive challenges. The factors under study were types of treatment (infiltrant [Icon], sealant [Helioseal Clear], adhesive [Adper Scotchbond Multi-Purpose Plus], and control [no treatment]); wear conditions (erosion [ERO] and erosion + abrasion [ERO + ABR]) and challenge time (5 and 20 days) in a single-phase study. The blocks were prepared from bovine enamel, eroded (0.01 M HCl, pH 2.3 for 30 seconds) and randomized among treatments, wear conditions, and volunteers. The application of resin-based materials followed the manufacturers' recommendations. Twenty-one volunteers wore the palatal intraoral device, in which one row corresponded to ERO and the other to ERO + ABR. In each row, all treatments were represented (2 blocks per treatment). For 20 days, the erosive challenge was performed 4 times/day (immersion in 0.01 M HCl, pH 2.3, for 2 minutes) for the ERO condition. For the ERO + ABR condition, two of the erosive challenges were followed by abrasion for 15 seconds with fluoride dentifrice slurry. Enamel and/or material loss was measured using profilometry (initial, after treatment, and after the end of the fifth and 20th days of in situ erosive challenge) and analyzed by ANOVA models and Tukey's test (α=0.05). The results showed that the application of resin-based materials did not cause superficial enamel loss. The infiltrant group showed a thicker layer of material above the enamel compared with the other materials (p=0.001). After the erosive challenge, there was no difference between the conditions ERO and ERO + ABR (p=0.869). All materials protected the enamel against erosion progression compared with the control group (p=0.001). Based on these results, we conclude that the application of resin-based materials results in protection of previously eroded enamel subjected to in situ erosive and abrasive challenge for 20 days.

Dental implants in patients with osteoporosis: a systematic review with meta-analysis.

There is currently no consensus regarding the survival rate of osseointegrated implants in patients with osteoporosis. A systematic review with meta-analysis was performed to evaluate the survival rate of implants in such patients. The PubMed/MEDLINE, Web of Science, Cochrane Library, and SciELO databases were used to identify articles published up to September 2016. The systematic review was performed in accordance with PRISMA/PICO requirements and the risk of bias was assessed (Australian National Health and Medical Research Council scale). The relative risk (RR) of implant failure and mean marginal bone loss were analyzed within a 95% confidence interval (CI). Fifteen studies involving 8859 patients and 29,798 implants were included. The main outcome of the meta-analysis indicated that there was no difference in implant survival rate between patients with and without osteoporosis, either at the implant level (RR 1.39, 95% CI 0.93-2.08; P=0.11) or at the patient level (RR 0.98, 95% CI 0.50-1.89; P=0.94). However, the meta-analysis for the secondary outcome revealed a significant difference in marginal bone loss around implants between patients with and without osteoporosis (0.18mm, 95% CI 0.05-0.30, P=0.005). Data heterogeneity was low. An increase in peri-implant bone loss was observed in the osteoporosis group. Randomized and controlled clinical studies should be conducted to analyze possible biases.

Treatment of lower lip pits in Van der Woude syndrome: a systematic review.

The presence of lower lip pits in individuals with Van der Woude syndrome (VWS) may cause discomfort due to saliva secretion. Furthermore, one of the main complaints in relation to lip pits is poor aesthetics, which often affects quality of life. The aim of this systematic review was to identify the best technique for the surgical removal of lower lip pits in terms of aesthetic and functional characteristics. A search of the PubMed, Embase, Web of Science, Science Direct, and Scopus databases was performed on December 27, 2016, which retrieved 88 records without duplicates. Among these papers, three ultimately met all eligibility criteria. The three studies included a total of 61 individuals, with follow-up ranging from 6 months to 10 years and sample collection from 10 to 24 years. The findings demonstrated that the outcome of surgical removal of lower lip pits was better with the use of vertical wedge excision, inverted-T lip reduction, Mutaf-Goldstein technique and modified simple excision than with simple excision. Simple excision may result in postoperative complications, such as mucocele and pit recurrence.

Role of Proteolytic Enzyme Inhibitors on Carious and Eroded Dentin Associated With a Universal Bonding System.

OBJECTIVES: The aim of this study was to evaluate the effect of proteolytic inhibitors on the bond strength of a universal adhesive system (etch-and-rinse mode) applied to artificial carious and eroded dentin. METHODS: Ninety molars were prepared and randomly divided into three groups according to the substrate: N, no challenges; ACD, artificial carious dentin simulation and ERO, artificial erosion simulation with orange juice. All groups were redivided into three subgroups according to the dentin pretreatment: W, water; CHX, 2% digluconate chlorhexidine; and E-64 (trans-epoxysuccinyl-L-leucylamido-[4-guanidino] butane), 5 µM E-64 inhibitor. They constituted a total of nine groups (n=10): N-W, N-CHX, N-E64, ACD-W, ACD-CHX, ACD-E64, ERO-W, ERO-CHX, and ERO-E64. All specimens were restored with Adper Single Bond Universal/Filtek Z250. Beams (0.64 mm2) were obtained and subjected to the microtensile test (µTBS) in a universal testing machine at 0.5 mm/min. The failure mode of the interfaces was determined by optical microscopy (40× magnification). Data were statistically analyzed by three-way analysis of variance and Tukey tests (p<0.05). RESULTS: All individual factors (p<0.0001) and the interaction between substrate and treatment (p=0.0011) and between substrate and time (p=0.0003) were statistically significant. The caries substrate contributed negatively to bond strength. Chlorhexidine reduced bond strength for normal and eroded conditions. Only the normal substrate was negatively affected by time despite the pretreatment. CONCLUSIONS: The universal bonding system appears to be a promising bonding strategy for the maintenance of bond strength to affected dentin. E-64 did not affect bonding to the dentin in contrast to the use of chlorhexidine, which, when associated with the universal system, did affect the microtensile bond strength for artificial carious dentin.

In situ Effect of Chewing Gum with and without CPP-ACP on Enamel Surface Hardness Subsequent to ex vivo Acid Challenge.

The erosion-protective effect of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) is controversial. This study aimed to investigate the ability of CPP-ACP chewing gum to prevent a single event of erosive demineralization in situ. Bovine enamel blocks (n = 120) were randomly assigned to 3 phases according to the baseline surface hardness: phase I (PI) - chewing gum with CPP-ACP, phase II (PII) - chewing gum without CPP-ACP, and control phase (PIII) - salivary effect without stimulation (no gum). Nineteen volunteers participated in this study during 3 crossover phases of 2 h. In PI and PII, the volunteers wore intraoral palatal appliances for 120 min and chewed a unit of the corresponding chewing gum for the final 30 min. In the control phase the volunteers wore the appliance for 2 h, without chewing gum. Immediately after intraoral use, the appliances were extraorally immersed in a cola drink for 5 min to promote erosive demineralization. The percentage of surface hardness loss was calculated. The data were analyzed by ANOVA models and Tukey's test. Lower enamel hardness loss was found after the use of chewing gum with CPP-ACP (PI: 32.7%) and without CPP-ACP (PII: 33.5%) compared to the salivary effect without stimulation (PIII: 39.8%) (p < 0.05). There was no difference between PI and PII (p > 0.05). The results suggest that the use of chewing gum immediately before an erosive demineralization can diminish enamel hardness loss. However, the presence of CPP-ACP in the chewing gum cannot enhance this protective effect.

Platform-switching implants and bone preservation: a systematic review and meta-analysis.

The aim of this study was to perform a systematic review and meta-analysis to evaluate the possible benefits of platform-switching (PSW) implants when compared to regular platform (RP) implants in the categories of bone preservation and longevity. This systematic review and meta-analysis was performed in accordance with the PRISMA statement, PICO question, and Jadad scale. The relative risk (RR) of failure and the mean difference for marginal bone loss were calculated considering a confidence interval (CI) of 95%. Heterogeneity and subgroup analyses were performed, and funnel plots drawn. Twenty-five studies (17 randomized controlled trials (RCTs) and eight prospective studies) involving 1098 patients and 2310 implants were analysed. The meta-analysis revealed a significant reduction in crestal bone loss for PSW implants compared with RP implants (-0.41mm, 95% CI -0.52 to -0.29, P<0.00001). However, there was no statistically significant difference in implant failure (RR 1.10, 95% CI 0.6-2.02, P=0.75). A reduction in bone loss with PSW implants was observed for the following subgroups: RCTs only, implants in the maxilla, and implants in the mandible. PSW implants presented lower bone resorption compared with RP implants. RCTs should be done to explain the possible biases.

In Vitro Effects of Resin Infiltration on Enamel Erosion Inhibition.

Resin-based materials that show promising effects for preventing the progression of erosion have been studied. This in vitro study evaluated the effects of applying resin-based materials, including resin infiltration, on previously eroded enamel subjected to erosive challenges. The influence of enamel surface etching prior to application of the material was also studied. Bovine enamel blocks were immersed in hydrochloric acid (HCl), 0.01 M (pH 2.3), for 30 seconds in order to form a softened erosion lesion. The blocks were then randomly divided into nine groups (n=12) and treated as follows: C = control without treatment; Hel = pit & fissure resin sealant (Helioseal Clear); Adh = two-step self-etching adhesive system (AdheSe); Tet = two-step conventional adhesive system (Tetric N-bond); and Inf = infiltrant (Icon). The Helno, Adhno, Tetno, and Infno groups received the same materials without (or with no) surface conditioning. The depth of the material's penetration into softened erosion lesions was qualitatively analyzed using reflection and fluorescence confocal microscopy. After application of the materials, the blocks were immersed in HCl for two minutes; this step was followed by immersion in artificial saliva for 120 minutes four times a day for five days (erosive cycling). Both the enamel alteration and material thickness were analyzed using profilometry, and the results were submitted to Kruskal-Wallis and Dunn tests (p>0.05). Images from the confocal microscopy showed minimal penetration of Adh/Adhno and deep penetration of Inf/Infno into the erosive lesions. The groups Hel, Adh, Inf, Tetno, and Infno resulted in the formation of a layer of material over the enamel, which was effective in inhibiting the progression of erosion. In conclusion, the infiltrant, with or without etching, was able to penetrate and protect the enamel against dental erosion. The other resin-based materials, except for the two-step conventional adhesive, were able to penetrate and inhibit the progression of erosive lesions only when they were applied after enamel etching.

Effect of 2% chlorhexidine digluconate on bond strength of a glass-fibre post to root dentine.

AIM: To assess the immediate influence of dentine bonding systems (DBS) associated with 2% chlorhexidine digluconate (CHX) on glass-fibre post-bond strength to root dentine, in terms of coronal, middle and apical thirds. METHODOLOGY: Sixty bovine roots were root filled and randomly assigned to 1 of 6 groups (n = 10): SBMP (3-step etch-and-rinse system, Scotchbond Multi-Purpose), SB (2-step etch-and-rinse system, Single Bond 2), SE (2-step self-etching system, Clearfil SE Bond) and SBMP-CHX, SB-CHX and SE-CHX, respectively, associated with CHX. For all groups, a glass-fibre post was luted with a dual-cure resin cement, RelyX ARC. After 7-day storage, specimens were subjected to the push-out test. Failure modes were analysed under optical microscopy (40x). Bond strength values were statistically analysed by two-way anova and Bonferroni tests (P < 0.05). RESULTS: The effect of DBS was significant (P < 0.05), and SE reached higher bond strength in comparison with the other DBS tested. CHX association did not show improvement with any DBS (P > 0.05); rather, it negatively affected SE, which was detected for all thirds. There was no difference between thirds (P > 0.05), except for the SE-CHX, which presented lower values for the apical third (P < 0.05). Adhesive cement/dentine adhesive failure was predominant for all groups. CHX did not influence the failure mode for any DBS (P > 0.05). CONCLUSIONS: The performance of the dentine bonding systems was material dependent. CHX did not improve immediate bond strength; however, CHX negatively affected the bond strength of the self-etching system, especially in the third apical.

Cross-sectional microhardness of human enamel subjected to erosive, cariogenic or combined erosive/cariogenic challenges.

This in situ study evaluated the interaction between caries and erosion processes. In the first phase, enamel specimens were subjected to erosion without dental plaque (EO) or to erosion with plaque (EP); in the second phase, they were subjected to erosion plus cariogenic challenge (EC) or cariogenic challenge (CO), both with plaque accumulation. Cross-sectional hardness data (10-330 microm depth) were tested using ANOVA (alpha = 0.05). EO and EP showed surface softening to 10 microm depth. CO and EC produced subsurface lesions, of similar depth (up to 220 microm), with CO showing higher integrated loss of hardness than EC, indicating that cariogenic and erosive challenges did not have an additive effect.

Effect of prolonged erosive pH cycling on different restorative materials.

This in vitro study evaluated the effect of a prolonged erosive pH cycling on the superficial microhardness change (SMHC) and the erosive wear of different restorative materials. Eighty enamel specimens with prepared cavities of 1.5 x 1.5 mm were randomly divided into eight groups according to the restorative materials used for the fillings (RMGI - resin-modified glass-ionomer, CGI - conventional glass-ionomer, CR- composite resin, A - amalgam) and immersion media used (ERO - erosive medium or SAL - artificial saliva). During 35 days, half of the specimens were immersed in a cola drink (ERO), for 5 min, three times a day, and they remained in SAL between the erosive cycles. The other half of the specimens was immersed in SAL only, for the entire experimental period (control). Data were tested for significant differences by anova and Tukey's tests (P < 0.05). Scanning electron microscopy images were made to illustrate the enamel erosive wear and restorative materials alterations. The mean SMHC (%) and mean erosive wear (mum) of the materials were: RMGI-ERO (30/0.5); CGI-ERO (37/0.5); CR-ERO (-0.3/0.3); A-ERO (-4/0.3); RMGI-SAL (4/0.4); CGI-SAL (-6/0.4); CR-SAL (-3/0.2) and A-SAL (2/0.4). Scanning electron microscopy images showed pronounced enamel erosive wear on groups submitted to erosive pH cycling when compared with groups maintained in saliva. In conclusion, the prolonged pH cycling promoted significantly higher alterations (SMHC and erosive wear) on the glass-ionomer cements than the CR and amalgam.

Effects of erosive, cariogenic or combined erosive/cariogenic challenges on human enamel: an in situ/ex vivo study.

Individuals with cariogenic diet can also consume erosive beverages. Thus, it seems necessary to investigate a possible caries/erosion interaction. To test in situ/ex vivo a combination of these challenges, 11 subjects wore intraoral appliances containing four enamel blocks randomly assigned. In the first 2-week phase, the appliances were immersed in a cola drink 3 times/day. Two blocks were free of plaque (erosion only: EO) and two blocks were covered with plaque (erosion + plaque: EP). In the second 2-week phase, four new blocks were all covered with plaque and subjected to a sucrose solution 8 times/day. Among the four new blocks, two were also subjected to the cola drink 3 times/day (erosion + caries: EC) while the other two were not (caries only: CO). Thus, in EO, the specimens were fixed at the intraoral appliance level. In EP, EC and CO they were fixed 1.0 mm under the appliance level and covered with plastic meshes for dental plaque accumulation. Changes in wear and hardness were measured. Data were tested using ANOVA and Tukey's test (p < 0.05). Mean values of wear (microm) and change in hardness (kp/mm(2)) were: EO 4.82/310; EP 0.14/48; EC 0.34/245; CO 0.42/309. With respect to surface softening, EP and EC differed significantly from each other and from EO and CO, which did not differ significantly. EO presented significantly higher wear than the other groups. The data suggest that the presence of dental plaque can decrease the acid attack of an erosive drink and the association of erosive and cariogenic challenges showed less enamel alterations when compared to erosive or cariogenic challenges only.

Effect of salivary stimulation on erosion of human and bovine enamel subjected or not to subsequent abrasion: an in situ/ex vivo study.

This in situ/ex vivo study evaluated whether saliva stimulated by chewing gum could prevent or reduce the wear and the percent change in microhardness (%SMH) of bovine and human enamel submitted to erosion followed by brushing abrasion immediately or after 1 h. During 2 experimental 7-day crossover phases, 9 previously selected volunteers wore intraoral palatal devices, with 12 enamel specimens (6 human and 6 bovine). In the first phase, the volunteers immersed the device for 5 min in 150 ml of cola drink, 4 times per day (at 8, 12, 16 and 20 h). Immediately after the immersions, no treatment was performed in 4 specimens, 4 other specimens were immediately brushed (0 min) using a fluoride dentifrice, and the device was replaced into the mouth. After 60 min, the remaining 4 specimens were brushed. In the second phase, the procedures were repeated, but after the immersions, the volunteers stimulated the salivary flow rate by chewing a sugar-free gum for 30 min. Changes in wear and %SMH were measured. ANOVA and Tukey's test showed statistical differences (p<0.05) for the following comparisons. The chewing gum promoted less wear and %SMH. A decreasing %SMH and an increasing enamel wear were observed in the following conditions: erosion only, 60 min and 0 min. The human enamel presented greater %SMH and less wear compared to bovine enamel. The data suggest that the salivary stimulation after an erosive or erosive/abrasive attack can reduce the dental wear and the %SMH.